University Catalog

AE 5101. GRADUATE SEMINAR. 1 Hour.

The purpose is to acquaint graduate students with ongoing research at UTA, and outside in academia and industry. Seminars are given by graduate students of the department based on their ongoing research. Seminars are also given by external speakers from academia, industry and government.

AE 5191. ADVANCED STUDIES IN AEROSPACE ENGINEERING. 1 Hour.

Individual research or design project performed for fulfilling the requirements of the Master of Engineering degree option. Prior approval of the AE Graduate Advisor is required for enrollment. A written and/or oral report is required.

AE 5291. ADVANCED STUDIES IN AEROSPACE ENGINEERING. 2 Hours.

Individual research or design project performed for fulfilling the requirements of the Master of Engineering degree option. Prior approval of the AE Graduate Advisor is required for enrollment. A written and/or oral report is required.

AE 5300. PREPARATORY COURSE FOR AEROSPACE ENGINEERING. 3 Hours.

The course may be offered with multiple sections, wherein each section is paired with a corresponding UG course being offered that semester. The purpose of this course is to strengthen academic preparation of students who were found inadequately prepared for a graduate degree in Aerospace Engineering. Students can concurrently enroll in multiple sections and may need to enroll in this course multiple times until their academic preparation is deemed complete. In order to pass this class, the student has to earn at least a B grade in aggregate based on all the assignments and exams. May be repeated as often as required.

AE 5301. ADVANCED TOPICS IN AEROSPACE ENGINEERING. 3 Hours.

To provide formal instruction in special topics pertinent to Aerospace Engineering from semester to semester depending on the availability of faculty. May be repeated for credit as provided topics change.

AE 5302. ADVANCED FLIGHT MECHANICS. 3 Hours.

Rigid body motion. Kinematics and dynamics of aerospace vehicles. Linear and nonlinear control of aircraft and spacecraft. Advanced aircraft and spacecraft modeling and control issues. Prerequisite: MAE 3405 and MAE 4310.

AE 5303. CLASSICAL METHODS OF CONTROL SYSTEMS ANALYSIS AND SYNTHESIS. 3 Hours.

Equip the student with familiarity of significant tools of the control engineer. Topics covered include controllers and their effect on system performance and stability, block diagram algebra, stability and analysis, system performance definition, root locus, frequency techniques, and state variable methods. Digital simulation tools for design and simulation of control systems. Demonstration of controller design and performance in the laboratory. Also offered as ME 5303.

AE 5305. DYNAMIC SYSTEMS MODELING. 3 Hours.

To equip the student with the capability of determining the necessary equations for distributed and lumped parameter modeling of mixed physical system types including mechanical, fluid, electrical, and thermal components. Models are formulated for computer simulation and analysis for systems with deterministic and stochastic inputs. Topics of random vibration and system identification are included. Also offered as ME 5305.

AE 5310. FINITE ELEMENT METHODS. 3 Hours.

Finite element method in the study of the static response of complex structures and of continua applications to field problems; analytical methods emphasized and digital computer application undertaken. Also offered as ME 5310.

AE 5311. STRUCTURAL DYNAMICS. 3 Hours.

Natural frequencies; forced response of complex structural systems studied through the use of the finite element method; computational aspects of these problems discussed, and digital computer applications undertaken. Also offered as ME 5311.

AE 5312. CONTINUUM MECHANICS. 3 Hours.

Study of the underlying physical and mathematical principles relating to the behavior of continuous media; interrelationships between fluid and solid mechanics. Also offered as ME 5312.

AE 5313. FLUID DYNAMICS. 3 Hours.

Basic conservation laws, flow kinematics, special forms of the governing equations, two-dimensional potential flows, surface waves and some exact solutions of viscous incompressible flows. Also offered as ME 5313.

AE 5314. FRACTURE MECHANICS IN STRUCTURAL DESIGN. 3 Hours.

Linear elastic fracture mechanics, general yielding fracture mechanics, damage tolerance and durability design, fail safe and safe life design criteria, analysis of fatigue crack growth, residual strength analysis. Also offered as ME 5314.

AE 5315. FUNDAMENTALS OF COMPOSITES. 3 Hours.

Fundamental relationships between the mechanical and hygrothermal behavior and the composition of multiphase media; failure criteria. Also offered as ME 5315.

AE 5322. AEROELASTICITY. 3 Hours.

Math models for the steady aerodynamics and structural stiffness of aircraft wings are presented and combined into a static aeroelastic math model. Loss of wing lift due to static aeroelasticity as well as the structural instability called aeroelastic divergence are covered.

AE 5325. COMBUSTION. 3 Hours.

Fundamental treatment of problems involving simultaneous occurrence of chemical reaction and transfer of heat, mass and momentum. Topics include kinetically controlled combustion phenomena; diffusion flames in liquid fuel combustion; combustion of solids; combustion of gaseous fuel jets; flames in premixed gasses. Also offered as ME 5325.

AE 5326. AIR-BREATHING PROPULSION. 3 Hours.

Development of thrust and efficiency equations, thermodynamic cycle analysis, cycle design methods of aerospace propulsion systems, component performance analysis methods, component matching and dynamic interactions, and vehicle/propulsion-system integration.

AE 5327. COMPUTATIONAL AERODYNAMICS I. 3 Hours.

Solution of engineering problems by finite-difference methods, emphasis on aerodynamic problems characterized by single linear and non-linear equations, introduction to and application of major algorithms used in solving aerodynamics problems by computational methods.

AE 5328. COMPUTATIONAL AERODYNAMICS II. 3 Hours.

Review of the fundamental equations of aerodynamics, development of methods for solving Euler, boundary-layer, Navier-Stokes, and parabolized Navier-Stokes equations, application to practical aerodynamic analysis and design problems.

AE 5331. ANALYTIC METHODS ENGINEERING. 3 Hours.

Introduction to advanced analytic methods in engineering. Methods include multivariable calculus and field theory, Fourier series, Fourier and Laplace Transforms. Also offered as ME 5331. Prerequisite: Undergraduate degree in engineering, physics, or mathematics.

AE 5332. ENGINEERING ANALYSIS. 3 Hours.

Introduction to partial differential equations and complex variable theory with application to modeling of physical systems. Also offered as ME 5332.

AE 5335. OPTIMAL CONTROL OF DYNAMIC SYS. 3 Hours.

Linear and nonlinear optimization methods; optimal control; continuous time Ricatti equation; bang-bang control; singular arcs; differential inclusions; collocation techniques; design of optimal dynamic system trajectories. Also offered as ME 5335.

AE 5336. OPTIMAL ESTIMATION OF DYNAMIC SYSTEMS. 3 Hours.

Kalman filter design and implementation. Optimal filtering for discrete-time and continuous-time dynamical systems with noise. Wiener filtering. State-space determination. Prerequisite: Prior introductory systems or identification course is desirable. Also offered as ME 5336 and EE 6327.

AE 5337. INTRODUCTION TO ROBOTICS. 3 Hours.

An overview of industrial robots and their application to traditional and emerging applications. Coordinate systems and homogeneous transformations, kinematics of manipulators; motion characteristics and trajectories; dynamics and control of manipulators; actuation and design issues. Programming of industrial robotic manipulators in the laboratory. Also offered as ME 5337.

AE 5338. ANALYTICAL & COMPUTATIONAL DYN. 3 Hours.

The course focuses on developing the equations of motion for dynamic systems composed of multiple, connected and unconnected, rigid bodies using Kane's method and the Lagrangian approach. The resulting model is used to simulate and visualize the predicted motion. Topics include kinematics, Euler parameters, kinematic constraints, virtual work, the calculus of variations, energy, momentum, contact, impact, and checking functions. Also offered as ME 5338.

AE 5339. STRUCTURAL ASPECTS OF DESIGN. 3 Hours.

Emphasis on determination of stresses and prediction of failure in machine and structural components; stress-strain relations in elastic and plastic regions; static failure and failure criteria; contact stress; notched sensitivity; strain-fatigue life relationship; characteristics of cracks in structural components. Also offered as ME 5339.

AE 5341. CONTROL SYSTEM COMPONENTS. 3 Hours.

The components and hardware used in electronic, hydraulic, and pneumatic control systems; techniques of amplification, computation, compensation, actuation, and sensing; modeling of multiport systems as well as servo systems analysis. Pulse modulated systems. Prerequisite: Undergraduate introductory control course in Mechanical Engineering or equivalent or ME 5303 or equivalent. Also offered as ME 5341.

AE 5342. GAS DYNAMICS. 3 Hours.

Review of fundamental compressible flow theory, method of characteristics for perfect gases, the Rankine-Hugoniot conditions, linearized flow theory. Also offered as ME 5342.

AE 5345. NUMERICAL HEAT TRANSFER. 3 Hours.

Discussion of numerical methods for conduction and convection heat transfer problems includes introduction to various computational techniques suitable for digital computers. Finite difference method is emphasized. Also offered as ME 5345.

AE 5347. ROCKET PROPULSION. 3 Hours.

Thrust and efficiency relations, trajectory analysis, introduction to design and performance analysis of chemical (liquid and solid), electrical and nuclear rocket systems, combined cycle propulsion systems, and pulse detonation rockets.

AE 5348. HYPERSONIC PROPULSION. 3 Hours.

Design and performance analysis of propulsion systems for sustained flight at hypersonic speeds, airframe/propulsion system integration, supersonic combustion, finite-rate chemistry effects, radiative cooling.

AE 5360. MULTIDISCIPLINARY INVERSE DESIGN AND OPTIMIZATION. 3 Hours.

For a new design of any realistic device to be competitive, it must satisfy a number of often conflicting requirements, objectives, and constraints. This course offers a variety of basic concepts and methodologies for inverse design and optimization with practical applications in fluid mechanics, heat transfer, elasticity, and electromagnetism. Also offered as ME 5360.

AE 5362. GUIDANCE, NAVIGATION, AND CONTROL OF AEROSPACE VEHICLES. 3 Hours.

Basics of flight dynamics and control. Autopilot structures for aerospace vehicles (aircraft, missiles, launch vehicles). Equilibrium glide trajectories for atmospheric flight. Discussion of the various guidance algorithms used in aircraft/missiles/launch vehicles. Basics of Kalman filtering, sensor and data fusion. Selection and trade-off between various navigation components such as the IMU, GPS and other navigation components. Integration of the guidance, navigation and control components in aerospace vehicles.

AE 5363. INTRODUCTION TO ROTORCRAFT ANALYSIS. 3 Hours.

History of rotorcraft. Behavior of the rotor blade in hover and forward flight. Rotor configurations, dynamic coupling with the fuselage, elastic and aeroelastic effects. Also offered as ME 5363.

AE 5364. INTRODUCTION TO AERODYNAMICS OF ROTORCRAFT. 3 Hours.

Practical aerodynamics of rotors and other components of rotorcraft. Introduction to performance, handling qualities, and general flight mechanics related to rotorcraft design, test, and certification requirements. Emphasis is on real rotorcraft mission capabilities as defined by the customer. Also offered as ME 5364.

AE 5365. INTRODUCTION TO HELICOPTER AND TILTROTOR SIMULATION. 3 Hours.

Dynamic and aerodynamic modeling of rotorcraft elements using vector mechanics, linear algebra, calculus and numerical methods. Special emphasis on rotors, aerodynamic interference, proper axis system representation, model assembly methods and trimming. Also offered as ME 5365.

AE 5367. HIGH-SPEED AIRCRAFT AND SPACE ACCESS VEHICLE DESIGN. 3 Hours.

An introductory course on high-speed aircraft and space access vehicle design. The course concentrates on reusable flight vehicles. Topics covered are historical case studies, design disciplines, design space visualization and proof of design convergence. Prerequisites: consent of the instructor.

AE 5368. FLIGHT VEHICLE SYNTHESIS AND SYSTEMS ENGINEERING. 3 Hours.

An introductory course on multi-disciplinary design decision-making applied to flight vehicle design. The course introduces decision-making techniques leading to efficient aerospace product design. The following main topics are covered: a) management domain, b) operational domain, c) engineering domain. Prerequisites: MAE 4350, MAE 4351 or equivalent.

AE 5372. PARAMETRIC SIZING OF HIGH-SPEED AIRCRAFT. 3 Hours.

An introductory course on high-speed aircraft design. Aimed to develop insight into basic concepts underlining the analysis and design of supersonic and hypersonic aircraft. Topics covered are historical case studies, design disciplines, and design methodologies. Prerequisite: MAE 4350, MAE 4351 or equivalent.

AE 5374. NONLINEAR SYSTEMS ANALYSIS AND CONTROLS. 3 Hours.

Nonlinear systems; phase plane analysis; Poincare-Bendixon theorems; nonlinear system stability; limit cycles and oscillations; center manifold theorem, Lyapunov methods in control; variable structure control; feedback linearization; backstepping techniques. Also offered as ME 5374.

AE 5378. INTRODUCTION TO UNMANNED VEHICLE SYSTEMS. 3 Hours.

Introduction to UVS (Unmanned Vehicle Systems) such as UAS (Unmanned Aircraft Systems), UGS (Unmanned Ground System) and UMS (Unmanned Maritime System), their history, missions, capabilities, types, configurations, subsystems, and the disciplines needed for UVS development and operation. UVS missions could include student competitions sponsored by various technical organizations. This course is team-taught by engineering faculty. Also offered as MAE 4378 and ME 5378.

AE 5379. UNMANNED VEHICLE SYSTEM DEVELOPMENT. 3 Hours.

Introduction to the technologies needed to create an UVS (Unmanned Vehicle System). Integration of these technologies (embodied as a set of sensors, actuators, computing and mobility platform sub-systems) into a functioning UVS through team work. UVS could be designed to compete in a student competition sponsored by various technical organizations or to support a specific mission or function defined by the instructors. This course is team-taught by engineering faculty. Also offered as MAE 4379 and ME 5379. Prerequisite: B or better in MAE 4378 or AE 5378 or ME 5378 and admission to the UVS certificate program.

AE 5380. DESIGN OF DIGITAL CONTROL SYSTEMS. 3 Hours.

Difference equations, Z- and w-transforms, discrete TF (Transfer Function). Discrete equivalence (DE) to continuous TF. Aliasing & Nyquist sampling theorem. Design by DE, root locus in z-plane & Youla parameterization. Discrete state-space model, minimality after sampling, pole placement, Moore-Kimura method, linear quadratic regulator, asymptotic observer. Computer simulation and/or lab implementation. Also offered as ME 5380, EE 5324. Prerequisite: MAE 4310 or equivalent.

AE 5381. BOUNDARY LAYERS. 3 Hours.

An introductory course on boundary layers. The coverage emphasizes the physical understanding and the mathematical foundations of boundary layers, including applications. Topics covered include laminar and turbulent incompressible and compressible layers, and an introduction to boundary layer transition. Also offered as ME 5381.

AE 5382. ADVANCED ASTRONAUTICS. 3 Hours.

Topics include orbital mechanics, orbital maneuvering, relative motion, orbit determination and estimation, three body problem, perturbations and numerical techniques.

AE 5383. HYPERSONIC FLOW. 3 Hours.

General features of hypersonic flow fields. Inviscid hypersonic flow: thin shock layer theory, Newtonian flow, constant density solutions, small disturbance theory, method of characteristics.

AE 5385. HIGH TEMPERATURE GASDYNAMICS. 3 Hours.

Surveys kinetic theory, statistical mechanics, and chemical reaction rate theory. Application to the prediction of thermodynamic properties of gasses and the analysis of problems in high-temperature gasdynamics.

AE 5386. WIND/WAVE/OCEAN CURRENT ENERGY HARVESTING SYSTEMS I - FUNDAMENTALS. 3 Hours.

A broad senior/graduate first course in wind/wave/ocean current energy harvesting systems, focused on fundamentals, and serving as the basis for subsequent MAE specialized follow-on graduate course offerings focused on structures (conventional and composite), aero/hydro-mechanical response and control, and tailoring and smart material actuation, respectively, as well as for non-MAE, specialized graduate courses.

AE 5391. ADVANCED STUDIES IN AEROSPACE ENGINEERING. 3 Hours.

Individual research or design project performed for fulfilling the requirements of the Master of Engineering degree option. Prior approval of the AE Graduate Advisor is required for enrollment. A written and/or oral report is required.

AE 5398. THESIS. 3 Hours.

Graded R/F only.

AE 5400. Preparatory Course for Aerospace Engineering. 4 Hours.

The course may be offered with multiple sections, wherein each section is paired with a corresponding UG course being offered that semester. The purpose of this course is to strengthen academic preparation of students who were found inadequately prepared for a graduate degree in Aerospace Engineering. Students can concurrently enroll in multiple sections and may need to enroll in this course multiple times until their academic preparation is deemed complete. In order to pass this class, the students has to earn at least a B grade in aggregate based all the assignments and exams. May be repeated as often as required.

AE 5698. THESIS. 6 Hours.

Graded P/R/F.

AE 6196. AEROSPACE ENGINEERING INTERNSHIP. 1 Hour.

For students participating in internship programs. Requires prior approval of Graduate Advisor.

AE 6197. RESEARCH IN AEROSPACE ENGINEERING. 1 Hour.

Research.

AE 6297. RESEARCH IN AEROSPACE ENGINEERING. 2 Hours.

Research.

AE 6299. DISSERTATION. 2 Hours.

Dissertation. Prerequisite: Admission to candidacy for the Doctoral of Philosophy degree.

AE 6310. ADVANCED FINITE ELEMENT METHODS. 3 Hours.

Modeling of large systems, composite and incompressible materials, substructuring, mesh generation, solids applications, nonlinear problems. Also offered as ME 6310.

AE 6311. ADVANCED STRUCTURAL DYNAMICS. 3 Hours.

Normal mode method for undamped and proportionally damped systems,component mode synthesis, generally damped systems, complex modes, effect of design modification on system response. Also offered as ME 6311. Prerequisite: ME 5311, AE 5311 or equivalent.

AE 6315. ADVANCED COMPOSITES. 3 Hours.

Review of current state-of-the-art applications of composites: composite structural analysis; structural properties, damage characterization and failure mechanism; stiffness loss due to damage, notched sensitivity; delamination;impact; fatigue characteristics; composite material testing; material allowables; characteristics of composite joints. Also offered as ME 6315 and MSE 5349. Prerequisite: ME 5315, AE 5315 or MSE 5348 or equivalent.

AE 6337. ADVANCED ROBOTICS. 3 Hours.

Advanced robotic design concepts considering structural statics, dynamics and control strategies for both rigid and flexible manipulators will be studied using optimization techniques and analytical approaches and introduction to micro- and mobile robotic devices. Study of emerging applications of robotics will be explored. Digital simulation of robotic devices and programming and demonstration of robotic devices in the laboratory. Prerequisites AE 5337, ME 5337 or equivalent.

AE 6345. TURBULENCE. 3 Hours.

Physical,numerical and theoretical aspects of turbulence. Review of the conservation equations for incompressible flow. Statistical descriptions pertaining to fluid mechanics. Classical description of turbulence via Reynolds averaging is developed with emphasis on homogeneous, isotropic turbulence. Application to free and wall-bounded flows. Modeling and simulation, including direct numerical simulation, classical turbulence modeling, PDF methods and large eddy simulation. Familiarity with vector or tensor notation is expected. Prerequisite: An advanced course in fluid mechanics (AE 5313/ME 5313) or continuum mechanics (AE 5312/ME 5312).

AE 6397. RESEARCH IN AEROSPACE ENGINEERING. 3 Hours.

Research.

AE 6399. DISSERTATION. 3 Hours.

Dissertation. Prerequisite: Admission to candidacy for the Doctor of Philosophy degree.

AE 6697. RESEARCH IN AEROSPACE ENGINEERING. 6 Hours.

Research.

AE 6699. DISSERTATION. 6 Hours.

Dissertation. Prerequisite: Admission to candidacy for the Doctor of Philosophy degree.

AE 6999. DISSERTATION. 9 Hours.

Dissertation. Prerequisite: Admission to candidacy for the Doctor of Philosophy degree.

AE 7399. DOCTORAL DEGREE COMPLETION. 3 Hours.

This course may be taken during the semester in which a student expects to complete all requirements for the doctoral degree and graduate. Enrolling in this course meets minimum enrollment requirements for graduation, for holding fellowships awarded by The Office of Graduate Studies and for full-time GTA or GRA positions. Students should verify that enrollment in this course meets other applicable enrollment requirements. To remain eligible in their final semester of study for grants, loans or other forms of financial aid administered by the Financial Aid Office must enroll in a minimum of 5 hours as required by the Office of Financial Aid. Other funding sources may also require more than 3-hours of enrollment. Additional hours may also be required to meet to requirements set by immigration law or by the policies of the student's degree program. Students should contact the Financial Aid Office, other sources of funding, Office of International Education and/or their graduate advisor to verify enrollment requirements before registering for this course. This course may only be taken once and may not be repeated. Students who do not complete all graduation requirements while enrolled in this course must enroll in a minimum of 6 dissertation hours (6699 or 6999) in their graduation term. Graded P/F/R.

MAE 1104. INTRODUCTION TO ENGINEERING. 1 Hour.

Introduction to basic engineering concepts. Students will become familiar with engineering and its many sub-fields, ethical responsibilities, creativity, and design.

MAE 1105. INTRODUCTION TO MECHANICAL AND AEROSPACE ENGINEERING. 1 Hour.

Introduction to basic engineering concepts. Opportunities are provided to develop skills in oral and written communication and department specific material. Case studies are presented and analyzed. Prerequisite: C or better in each of the following, MAE 1104 (or concurrent enrollment) and MATH 1302 or MATH 1322 (or concurrent enrollment) or MATH 1323 (or concurrent enrollment) or MATH 1426 (or concurrent enrollment).

MAE 1312. ENGINEERING STATICS. 3 Hours. (TCCN = ENGR 2301)

A study of forces and force systems, resultants and components of force systems, forces due to friction, conditions of equilibrium, forces acting on members of trusses and frame structures, centroids and moments of inertia. Vector and index notation introduced. Prerequisite: C or better in each of the following, MATH 1426 (or HONR-SC 1426) and PHYS 1443.

MAE 1351. ENGINEERING GRAPHICS AND INDUSTRIAL PRACTICES. 3 Hours.

Foundational course in modern graphical engineering communication. Introductory technical sketching and 2D CAD. Projections and views. Engineering drawings per ASME Y14 standards; geometric dimensioning and tolerancing. 3D solid modeling using feature-based, associative and parametric techniques for part and assembly design. Prerequisite: C or better in MATH 1322 (or concurrent enrollment) or C or better in MATH 1323 (or concurrent enrollment) or C or better in MATH 1426 (or concurrent enrollment).

MAE 2000. UNDERGRADUATE RESEARCH. 0 Hours.

Sophomore level undergraduate research. Prerequisite: Departmental good standing and permission of instructor. Prerequisite: Departmental good standing and permission of instructor. May be taken a maximum of 3 times.

MAE 2010. AUTOMOTIVE ENGINEERING PRACTICUM I. 0 Hours.

Practical design experience as full team member of automotive design competition team. Prerequisite: Permission of Director of the Arnold E. Petsche Center for Automotive Engineering.

MAE 2312. SOLID MECHANICS. 3 Hours.

The relationship between stresses and strains in elastic bodies and the tension, compression, shear, bending, torsion, and combined loadings which produce them. Deflections and elastic curves, shear and bending moment diagrams for beams, and column theory. Prerequisite: C or better in MAE 1312.

MAE 2314. FLUID MECHANICS I. 3 Hours.

Fundamental concepts of fluid mechanics leading to the development of both the integral and differential forms of the basic conservation equations. Application of the integral conservation equations to engineering problems in fluid dynamics including buoyancy and other hydrostatics problems. Dimensional analysis and similitude are also discussed. Prerequisite: C or better in each of the following, MAE 2323, MAE 2360, MAE 3360, and MAE 3310 (or concurrent enrollment).

MAE 2315. FLUID DYNAMICS. 3 Hours.

Introduction to Fluid Dynamics and low speed aerodynamics; fluid properties; dimensional analysis; conservation equations in integral and differential form; viscous flow; potential flow theory, air foil and finite wing theory. Prerequisites:C or better in each of the following, MAE 2323, MAE 3309 (or concurrent enrollment) or MAE 3310 (or concurrent enrollment), and MAE 3360 (or concurrent enrollment).

MAE 2323. DYNAMICS. 3 Hours. (TCCN = ENGR 2302)

The relation between forces acting on particles, systems of particles and rigid bodies, and the changes in motion produced. Review of kinematics and vector analysis, Newton's Laws, energy methods, methods of momentum, inertia tensor and Euler's equations of motion. Prerequisite: C or better in each of the following, MAE 1312 and MATH 2425 (or HONR-SC 2425).

MAE 2360. NUMERICAL ANALYSIS & PROGRAMMING. 3 Hours.

Utilization of digital computers in mechanical and aerospace engineering. Computational algorithms and their representation in FORTRAN, C, and Matlab. Introduction to linear algebra and numerical methods. Prerequisite: C or better in MATH 2425 (or HONR-SC 2425) (or concurrent enrollment).

MAE 2381. EXPERIMENTAL METHODS AND MEASUREMENTS. 3 Hours.

Introduction to data analysis, incorporating statistics and probability, design and planning of engineering experiments for error prediction and control. Measurement and instrumentation, basic instruments, their calibration and use. Prerequisite: C or better in each of the following, MAE 1351 and MATH 2425 (or HONR-SC 2425).

MAE 3000. UNDERGRADUATE RESEARCH. 0 Hours.

Junior level undergraduate research. Prerequisite: Departmental good academic standing and permission of instructor. May be taken a maximum of 3 times.

MAE 3181. MATERIALS AND STRUCTURES LAB. 1 Hour.

Experiments to study materials behavior and deformation of structural elements common to aerospace vehicles. Prerequisite: C or better in each of the following, MAE 2381 and MAE 3315 (or concurrent enrollment).

MAE 3182. AERODYNAMICS AND FLUIDS LAB. 1 Hour.

Wind tunnel experiments to study flow phenomena of aerodynamics interest, including scale testing of airfoils, wings, and aircraft. Prerequisite: C or better in each of the following, MAE 2381 and MAE 3303 (or concurrent enrollment).

MAE 3183. MEASUREMENTS LABORATORY II. 1 Hour.

Fundamental measurement techniques and experimental data analysis in mechanical engineering in the fields of thermal, fluid, structures, design, and dynamic systems. Introduction to sensor calibration, digital data acquisition, uncertainty analysis, and report writing. Prerequisite: C or better in each of the following, MAE 2381, MAE 3314, and MAE 3319.

MAE 3242. MECHANICAL DESIGN I. 2 Hours.

The overall nature of design as a process is presented along with various models, methods, techniques, and tools for the various phases of the process provide the student with an excellent understanding of how to design. Students learn to design mechanical components based on stress/deflection and the associated failure theories. Prerequisite: C or better in each of the following: MAE 2312, MAE 2323, and MAE 3324.

MAE 3303. AERODYNAMICS OF COMPRESSIBLE FLOWS. 3 Hours.

Adiabatic and isentropic flows; normal and oblique shockwaves; Prandtl-Meyer flows; expansion waves; compressible flow nozzles, diffusers, and wind tunnels; thin-airfoil and small-perturbation theory; design principles for supersonic vehicles and wind tunnels; methods of characteristics. Prerequisite: C or better in each of the following, MAE 2315, MAE 3309 (or MAE 3310), and MAE 3360.

MAE 3304. ASTRONAUTICS I. 3 Hours.

Introduction to astronautics, the solar system, and the two-body problem. Orbit shaping and orbit transfers. Patched conic approximations for interplanetary transfers. Introduction to the three-body problem and relative motion. Rigid spacecraft equation of motion. Active and passive attitude stabilization techniques for spacecraft. Prerequisite: C or better in each of the following: MAE 2323, MAE 2360, and MAE 3360.

MAE 3306. FLIGHT PERFORMANCE & STABILITY. 3 Hours.

Introduction to aircraft performance and the assessment of aircraft stability and control characteristics. Performance topics covered include cruise, climbing, gliding and turn flights, range and endurance. Stability and controlled topics covered include longitudinal, lateral and directional stability and control. Prerequisite: C or better in MAE 3303.

MAE 3309. THERMAL ENGINEERING. 3 Hours.

Basic concepts and definitions, properties of pure substance, work and heat, first law of thermodynamics, second law of thermodynamics, entropy, and introduction to conductive, convective, and radiative transfer. Prerequisite: C or better in each of the following, CHEM 1465 (or concurrent enrollment) or CHEM 1441 and CHEM 1442 (or concurrent enrollment); MATH 2425 (or HONR-SC 2425) and PHYS 1444.

MAE 3310. THERMODYNAMICS I. 3 Hours.

Basic concepts and definitions, properties of pure substance, work and heat, first law of thermodynamics, second law of thermodynamics, entropy, thermodynamics of gases, vapors, and liquids in various nonflow and flow processes, and irreversibility and availability. Prerequisite: C or better in each of the following, CHEM 1465 (or concurrent enrollment) or CHEM 1441 and CHEM 1442 (or concurrent enrollment); MAE 1312 (or concurrent enrollment), MATH 2425 (or HONR-SC 2425), and PHYS 1444.

MAE 3311. THERMODYNAMICS II. 3 Hours.

Availability, power, refrigeration and heat pump cycles (both gas and vapor), property relations and equations of state, ideal gas mixtures, mixtures of gases and vapors, psychrometrics, adiabatic flame temperature, thermochemical equilibrium, and compressible flow. Emphasis is on applying these topics to thermal systems design. Prerequisite: C or better in each of the following, MAE 2314 (or concurrent enrollment) and MAE 3310.

MAE 3314. HEAT TRANSFER. 3 Hours.

Topics cover the fundamental laws of heat and mass transfer, including steady and unsteady conduction, forced and free convection, and radiation as well as heat transfer in phase change. Applications of heat transfer to thermal systems design are included. Prerequisite: C or better in each of the following, MAE 2314 and MAE 3310.

MAE 3315. AEROSPACE STRUCTURAL STATICS. 3 Hours.

Overview of aircraft basic structural elements and materials; introduction to elasticity; equations of equilibrium; constitutive equations of isotropic solids; bending and torsion analysis of thin-walled beams; flexure shear of thin-walled beams with stringer reinforcement; introduction to fatigue and fracture analysis; failure criteria; energy method to find strain energy release rate; elastic column buckling. Prerequisite: C or better in MAE 2312.

MAE 3316. AEROSPACE STRUCTURAL DYNAMICS. 3 Hours.

Harmonic and periodic motion including both damped and undamped free and forced vibration. Single-and multi-degree-of-freedom discrete systems. Vibration of continuous systems. Introduction of finite element method for structural dynamics. Prerequisite: C or better in each of the following, MAE 2312, MAE 2323, MAE 3360, and MATH 3330.

MAE 3318. KINEMATICS AND DYNAMICS OF MACHINES. 3 Hours.

The motion and interaction of linkage and mechanisms. Fundamental concepts of kinematics and dynamics applied to the determination of degree of freedom mechanisms and forces acting on joints of mechanisms. Specific mechanisms and applications such as multi-body mechanisms, linkage synthesis, cam design, and balancing. Prerequisite: C or better in MAE 2323.

MAE 3319. DYNAMIC SYSTEMS MODELING AND SIMULATION. 3 Hours.

Introduction to modeling and prediction of behavior of engineering systems. Analytic and numerical simulation, state-space differential equations, and Laplace transform methods. Effects of physical characteristics of system elements on system design and dynamic performance. Prerequisite: C or better in each of the following, MAE 3314 (or concurrent enrollment), EE 2320, and MATH 3330.

MAE 3324. STRUCTURE & MECHANICAL BEHAVIOR OF MATERIALS. 3 Hours.

Crystal structure and defects in materials. Diffusion, phase diagrams and phase transformations in metalic systems. The inter relationships between processing, structure, and properties of engineering materials with emphasis on the mechanical behavior of metals, polymers, and composite materials. Prerequisites: C or better in each of the following, CHEM 1465 (or CHEM 1441 and CHEM 1442), MAE 2312 (or concurrent enrollment), and PHYS 1444.

MAE 3344. INTRODUCTION TO MANUFACTURING ENGINEERING. 3 Hours.

Introduction to casting, forming, machining, and joining processes for metals and nonmetals. Prerequisite: C or better in each of the following, MAE 2312 and MAE 3324.

MAE 3360. ENGINEERING ANALYSIS. 3 Hours.

Mathematical analysis with emphasis on solution techniques and engineering applications. Topics include: ordinary differential equations (ODE), Laplace Transform, numerical solutions of ODE, boundary value problems, Fourier series, Sturm-Liouville problem and vector calculus. Prerequisite: C or better in each of the following, MATH 2326 and MAE 2360 (or concurrent enrollment).

MAE 3405. FLIGHT DYNAMICS. 4 Hours.

Derivation of equation of motion (EOM) of a flight vehicle. Trimmed flight condition analysis based on the nonlinear EOM. Linearization of EOM for a given trimmed flight condition. State-space and transfer-function representations of the linear EOM. Aircraft stability and dynamic performance analysis based on the linear EOM. Prerequisite: C or better in each of the following, MAE 3306 (or concurrent enrollment) and MATH 3330.

MAE 4000. UNDERGRADUATE RESEARCH. 0 Hours.

Senior level undergraduate research. Prerequisite: Departmental good academic standing and permission of instructor. May be taken a maximum of 3 times.

MAE 4010. AUTOMOTIVE ENGINEERING PRACTICUM II. 0 Hours.

Practical design experience as full team member of automotive design competition team. Prerequisite: Permission of Director of the Arnold E. Petsche Center for Automotive Engineering.

MAE 4188. DESIGN PROJECT LABORATORY II. 1 Hour.

The design project from MAE 4287 continued. The design is finalized, a physical model (prototype) is manufactured and tested. Redesign and retest is accomplished as desired. The final design is documented by written report and oral presentation. Exit survey forms and exit essays must be submitted to complete the requirements of this course. Prerequisite: C or better in MAE 4287.

MAE 4191. SPECIAL PROBLEMS IN MECHANICAL AND AEROSPACE ENGINEERING. 1 Hour.

Special problems in mechanical and aerospace engineering for students of senior standing.

MAE 4287. DESIGN PROJECT I. 2 Hours.

Team engineering approach to a design project that integrates engineering knowledge from several courses. Problem definition and creative synthesis of prospective design solutions. Engineering proposals, feasibility studies, trade-off studies, systems models and analysis, decision making, and engineering reports and presentations. Professionalism, ethics, and societal impact issues. Prerequisite: C or better in MAE 4344 (or concurrent enrollment) and must be within two calendar semesters of graduation (possibly including an 11-week summer session). MAE 4287 and MAE 4188 must be taken in consecutive semesters.

MAE 4291. SPECIAL PROBLEMS IN MECHANICAL AND AEROSPACE ENGINEERING. 2 Hours.

Special problems in mechanical and aerospace engineering for students of senior standing.

MAE 4301. SPECIAL TOPICS IN MECHANICAL AND AEROSPACE ENGINEERING. 3 Hours.

Topics will vary from semester to semester depending on student interest and the availability of faculty. May be repeated, provided topics are different. Prior approval by the student's advisor required. Prerequisite: Vary by topic.

MAE 4304. ASTRONAUTICS II. 3 Hours.

The restricted three-body problem, the n-body problem, and approximations. Interplanetary transfers. Design considerations for both manned and unmanned interplanetary vehicles. Prerequisite: C or better in MAE 3304.

MAE 4307. FINITE ELEMENT METHODS. 3 Hours.

Static response of complex structures and continua; application to field problems; mesh generation; error estimation and adaptive refinement. Prerequisite: C or better in MAE 3242.

MAE 4310. INTRODUCTION TO AUTOMATIC CONTROL. 3 Hours.

Block diagram algebra, transfer functions, and stability criteria. The use of transient response, frequency response, and root locus techniques in the performance analysis, evaluation, and design of dynamic systems. Prerequisite: C or better in each of the following, MAE 3319 (or MAE 3405), and EE 2320.

MAE 4312. CONTROL SYSTEMS COMPONENTS. 3 Hours.

The components used in mechanical, electronic, and fluid power control systems are studied. Modeling and performance analysis are used to help in the understanding of system behavior. Prerequisite: C or better in MAE 4310.

MAE 4313. FLUID MECHANICS II. 3 Hours.

A continuation of MAE 2314, consisting of a study of boundary-layer flows, inviscid incompressible flow, compressible flow, aerodynamic surfaces, and turbomachinery. Prerequisite: C or better in each of the following, MAE 2314 and MAE 3310.

MAE 4314. MECHANICAL VIBRATIONS. 3 Hours.

Harmonic and periodic motion including both damped and undamped free and forced vibration. Single and multi-degree-of-freedom discrete systems. Vibration of continuous systems. Introduction of finite element method for structural dynamics. Prerequisite: C or better in each of the following, MAE 2312, MAE 2323, MAE 3360, and MATH 3330.

MAE 4315. INTRODUCTION TO COMPOSITES. 3 Hours.

Composite classification, laminate coding, fiber and weight fractions of composite lamina; lamina constitutive equations; structural characteristics of [A], [B], [D] matrices; lamination theory; thermal and moisture induced load and moment; lamina stress analysis and failure prediction; issues in composite structural design. Prerequisite: C or better in MAE 2312 (or CE 2313).

MAE 4320. HYDRAULIC AND PNEUMATIC SYSTEMS. 3 Hours.

The fundamentals of fluid mechanics as applied to hydraulic and pneumatic hardware. Mathematical models of pumps, motors, pistons, accumulators, valves, and transmission lines. Design and analysis procedures for implementing total fluid power systems with high operating efficiencies and adequate dynamic response characteristics. Theory is supported by laboratory demonstrations. Prerequisite: C or better in each of the following, MAE 2314, MAE 4310, and MAE 3310.

MAE 4321. AIR-BREATHING ENGINE PROPULSION. 3 Hours.

First course of a two semester sequence for students interested in aerospace propulsion. Development of thrust and efficiency relations, cycle analysis for ramjet, turbojet, and turbofan engines, component design and performance analysis, off-design performance analysis. Prerequisite: C or better in MAE 3303 (or MAE 3311).

MAE 4322. ROCKET PROPULSION. 3 Hours.

Examines chemical, nuclear, and electrical propulsion concepts. Development of design and performance analysis methods. Flight performance of rocket powered vehicles. Prerequisite: C or better in MAE 3303 (or MAE 3311).

MAE 4323. ENERGY CONVERSION. 3 Hours.

Thermodynamics as applied to thermo-mechanical systems such as power cycles, engines, turbines, refrigeration, and air-conditioning systems. Prerequisite: C or better in each of the following, MAE 3311 and MAE 3314.

MAE 4327. HEATING, VENTILATION, AND AIR CONDITIONING. 3 Hours.

Application of engineering sciences to design of heating, venting, and air conditioning (HVAC) systems. Humidification and dehumidification, psychrometric charts, heat load, cooling load, degree-days, comfort zones, and air distribution systems. Prerequisite: C or better in each of the following, MAE 3311 and MAE 3314.

MAE 4331. DESIGN FOR MANUFACTURING. 3 Hours.

Manufacturing methods and operations. The interaction between design and manufacturing stressed in terms of drawing specifications versus process capability and tolerances, including standards applications and redesign for producibility. Prerequisite: C or better in MAE 3242 (or MAE 3344).

MAE 4336. ADVANCED MECHANICAL BEHAVIOR OF MATERIALS. 3 Hours.

Concept of stress and strain; elementary dislocation theory. Deformation of single crystals; strengthening mechanisms like solid solution strengthening, and precipitation hardening. Fracture mechanics; microscopic aspects of fracture, fatigue, and creep of materials; design and processing of materials for improved mechanical properties. Prerequisite: C or better in each of the following, MAE 2312 and MAE 3324.

MAE 4338. FAILURE ANALYSIS. 3 Hours.

Theory and practice of techniques for determining modes of failure and fracture of engineering materials. Prerequisite: C or better in each of the following, MAE 2312 and MAE 3324.

MAE 4339. FRACTURE MECHANICS. 3 Hours.

Theory and applications of fracture mechanics. Stress analysis of cracks, crack-tip plasticity, fatigue crack growth, and stress corrosion cracking. Applicability to materials selection, structural design, failure analysis, and structural reliability. Prerequisite: C or better in MAE 3242.

MAE 4342. MECHANICAL DESIGN II. 3 Hours.

Analysis for the design and manufacture of basic mechanical elements, and their role in the design of machines. A brief review of relevant topics including stress/deflection, failure theories, and contact stress is initially conducted. It is then extended to the design of fundamental mechanical components including shafts, gears, springs, bearings, fasteners, and clutches/brakes. Prerequisite: C or better in each of the following, MAE 3242 and MAE 3318 (or concurrent enrollment).

MAE 4344. COMPUTER-AIDED ENGINEERING. 3 Hours.

A study of the principles of computer-aided engineering in mechanical and aerospace engineering. Applications in mechanical, structural, and thermal systems. Prerequisite: C or better in each of the following, MAE 3242, MAE 3314 (or concurrent enrollment), and MAE 3318.

MAE 4345. INTRODUCTION TO ROBOTICS. 3 Hours.

Overview of industrial robots. Study of principles of kinematics, dynamics, and control as applied to industrial robotic systems; robotic sensors and actuators; path planning; programming of industrial robot in the laboratory; survey of robotic applications in various modern and traditional fields; and guidelines to robot arm design and selection. Prerequisite: C or better in, MAE 3318 (or EE 4314).

MAE 4347. HEAT EXCHANGER DESIGN. 3 Hours.

Design procedure system evaluation; design parameters in heat exchangers. The course considers various heat exchanger configurations and includes student design projects. Prerequisite: C or better in MAE 3314.

MAE 4348. COOLING OF ELECTRONIC PACKAGES. 3 Hours.

The calculation of heat loads and temperature fields using different cooling techniques. Includes parameter evaluation and design studies. Prerequisite: C or better in, MAE 3314 (or MAE 3309).

MAE 4350. AEROSPACE VEHICLE DESIGN I. 3 Hours.

Analysis and design of an aerospace system such as a complete flight vehicle, a propulsion system, a structural system, or a control system; market analysis, operating studies, mission specification, civil and military certification requirements; design process, methods and tools; configuration concept selection, integration of design disciplines (aerodynamics, performance, flight mechanics, structures, cost, systems, etc.). Prerequisite: C or better in each of the following, MAE 3306 (or concurrent enrollment) and MAE 3405 (or concurrent enrollment).

MAE 4351. AEROSPACE VEHICLE DESIGN II. 3 Hours.

Analysis, design, and synthesis of an aerospace system such as a complete flight vehicle, a propulsion system, a structural system, or a control system; market analysis, operating studies, mission specification, civil and military certification requirements; design process, methods and tools; configuration concept selection, integration of individual design disciplines (aerodynamics, performance, flight mechanics, structures, cost, systems, etc.). Also included will be economic, environmental, sustainability, manufacturability, safety, social and political considerations. Formal written and oral reports are required. Exit survey forms and exit essays must be submitted to complete the requirements of this course. Prerequisite: C or better in MAE 4350.

MAE 4352. SPACE VEHICLE AND MISSION DESIGN. 3 Hours.

Space vehicle design; influence of space environment, astrodynamics, and atmospheric reentry. Space vehicle sub system design; propulsion, attitude determination and control, structural design, thermal control, power and telecommunications. Investigation into mission design concepts and considerations. Prerequisite: C or better in each of the following, MAE 2323 and MATH 2326.

MAE 4357. AUTOMOTIVE ENGINEERING. 3 Hours.

Introduction to automotive engine types and performance, drive train modeling and vehicle loading characteristics, fueling requirements, fuel injection systems, tire characteristics and modeling, suspension characteristics and handling, braking systems and requirements. Course taught through lecture, student presentations and student design projects. Prerequisite: C or better in each of the following, MAE 3360 (or MATH 3319) and MAE 2312 (or EE 3446).

MAE 4358. RACECAR ENGINEERING. 3 Hours.

This course is intended for Formula SAE team members and other interested students to develop new systems or analyze concepts for the Formula SAE or Formula Electric racecar and related equipment. The students will form teams and perform research and development on projects related to automotive or racecar engineering. Prerequisites: C or better in each of the following, MAE 3360 (or MATH 3319) and MAE 2312 (or EE 3446).

MAE 4378. INTRODUCTION TO UNMANNED VEHICLE SYSTEMS. 3 Hours.

Introduction to UVS (Unmanned Vehicle Systems) such as UAS (Unmanned Aircraft Systems), UGS (Unmanned Ground System) and UMS (Unmanned Maritime System), their history, missions, capabilities, types, configurations, subsystems, and the disciplines needed for UVS development and operation. UVS missions could include student competitions sponsored by various technical organizations. This course is team-taught by engineering faculty. Also offered as AE 5378 and ME 5378. Prerequisite: Admission to a professional engineering or science program.

MAE 4379. UNMANNED VEHICLE SYSTEM DEVELOPMENT. 3 Hours.

Introduction to the technologies needed to create an UVS (Unmanned Vehicle System). Integration of these technologies (embodied as a set of sensors, actuators, computing and mobility platform sub-systems) into a functioning UVS through team work. UVS could be designed to compete in a student competition sponsored by various technical organizations or to support a specific mission or function defined by the instructors. This course is team-taught by engineering faculty. Also offered as AE 5379 and ME 5379. Prerequisite: B or better in MAE 4378 and admission to the UVS certificate program.

MAE 4391. SPECIAL PROBLEMS IN MECHANICAL AND AEROSPACE ENGINEERING. 3 Hours.

Special problems in mechanical and aerospace engineering for students of senior standing.

ME 5010. AUTOMOTIVE ENGINEERING PRACTICUM. 0 Hours.

Practical design experience as full member of automotive design competition team. Prerequisite: Permission of Director for the Arnold E. Petsche Center for Automotive Engineering.

ME 5101. GRADUATE SEMINAR. 1 Hour.

The purpose is to acquaint graduate students with ongoing research at UTA, and outside in academia and industry. Seminars are given by graduate students of the department based on their ongoing research. Seminars are also given by external speakers from academia, industry and government.

ME 5191. PROJECT STUDIES IN MECHANICAL ENGINEERING. 1 Hour.

May be repeated for credit as topics change. Project work performed under a non-thesis degree will normally be accomplished under this course number, with prior approval of the Committee on Graduate Studies. May be graded pass/fail.

ME 5291. PROJECT STUDIES IN MECHANICAL ENGINEERING. 2 Hours.

May be repeated for credit as topics change. Work performed as a thesis substitute will normally be accomplished under this course number, with prior approval of the Committee on Graduate Studies. Maybe graded P/F.

ME 5303. CLASSICAL METHODS OF CONTROL SYSTEMS ANALYSIS AND SYNTHESIS. 3 Hours.

Equip the student with familiarity of significant tools of the control engineer. Topics covered include controllers and their effect on system performance and stability, block diagram algebra, stability and analysis, system performance definition, root locus, frequency techniques, and state variable methods. Digital simulation tools for design and simulation of control systems. Demonstration of controller design and performance in the laboratory. Also offered as AE 5303. Credit will be granted only once.

ME 5305. DYNAMIC SYSTEMS MODELING. 3 Hours.

To equip the student with the capability of determining the necessary equations for distributed and lumped parameter modeling of mixed physical system types including mechanical, fluid, electrical, and thermal components. Models are formulated for computer simulation and analysis for systems with deterministic and stochastic inputs. Topics of random vibration and system identification are included. Also offered as AE 5305. Credit will be granted only once.

ME 5306. FLUID POWER CONTROL. 3 Hours.

Mathematical models for hydraulic and pneumatic control components and systems including hydraulic pumps, motors, and spool valves. The application of electrohydraulic and hydromechanical servomechanisms for position and velocity control are treated. Theory supported by laboratory demonstrations and experiments.

ME 5307. OPTIMAL CONTROL OF DYNAMIC SYS. 3 Hours.

Linear and nonlinear optimization methods; optimal control; continuous time Ricatti equation; bang-bang control; singular arcs; differential inclusions; collocation techniques; design of optimal dynamic system trajectories. Also offered as ME 5335.

ME 5310. FINITE ELEMENT METHODS. 3 Hours.

Finite element method in the study of the static response of complex structures and of continua; applications to field problems; analytical methods emphasized, and digital computer application undertaken. Also offered as AE 5310. Credit will be granted only once.

ME 5311. STRUCTURAL DYNAMICS. 3 Hours.

Natural frequencies; forced and random response of complex structural systems studied through the use of the finite element method; computational aspects of these problems discussed, and digital computer applications undertaken. Also offered as AE 5311. Credit will be granted only once.

ME 5312. CONTINUUM MECHANICS. 3 Hours.

Study of the underlying physical and mathematical principles relating to the behavior of continuous media; interrelationships between fluid and solid mechanics. Also offered as AE 5312. Credit will be granted only once.

ME 5313. FLUID DYNAMICS. 3 Hours.

Basic conservation laws, flow kinematics, special forms of the governing equations, two-dimensional potential flows, surface waves and some exact solutions of viscous incompressible flows. Also offered as ME 5313.

ME 5314. FRACTURE MECHANICS IN STRUCTURAL DESIGN. 3 Hours.

Linear elastic fracture mechanics, general yielding fracture mechanics, damage tolerance and durability design, fail safe and safe life design criteria, analysis of fatigue crack growth, residual strength analysis. Also offered as AE 5314. Credit will be granted only once.

ME 5315. FUNDAMENTALS OF COMPOSITES. 3 Hours.

Fundamental relationships between the mechanical and hygrothermal behavior and the composition of multiphase media; failure criteria. Also offered as AE 5315 and MSE 5348. Credit will be granted only once.

ME 5316. THERMAL CONDUCTION. 3 Hours.

Fundamental laws, initial and boundary conditions, basic equations for isotropic and anisotropic media, related physical problems and steady and transient temperature distributions in solid structures.

ME 5317. CONVECTION HEAT TRANSFER. 3 Hours.

Equations of motion of viscous fluids are reviewed and the energy equations are introduced. Exact and approximate solutions are made for forced convective problems with non-isothermal and unsteady boundaries. Free convection and combined free- and forced-convection problems are solved.

ME 5318. RADIATIVE HEAT TRANSFER. 3 Hours.

General equations of radiative transfer derived and solved for special problems, and the elements of atomic, molecular, and continuum radiation are introduced.

ME 5319. ADVANCED FINITE ELEMENT METHODS. 3 Hours.

Continuation of ME 5310. Modeling of large systems, composite and incompressible materials, substructuring, mesh generation, solids applications, nonlinear problems. Also offered as AE 5319. Prerequisite: ME 5310 or equivalent.

ME 5321. ADVANCED CLASSICAL THERMODYNAMICS. 3 Hours.

Fundamentals of thermodynamics reviewed. Different treatments of principles studied, compared and formal relationships developed and applied to chemical, magnetic, electric and elastic systems.

ME 5322. ADVANCED STRUCTURAL DYNAMICS. 3 Hours.

Normal mode method for undamped and proportionally damped systems, component mode synthesis, generally damped systems, complex modes, effect of design modification on system response. Prerequisite: ME 5311 or equivalent.

ME 5325. COMBUSTION. 3 Hours.

Fundamental treatment of problems involving simultaneous occurrence of chemical reaction and transfer of heat, mass and momentum. Topics include kinetically controlled combustion phenomena; diffusion flames in liquid fuel combustion; combustion of solids; combustion of gaseous fuel jets; flames in premixed gasses. Also offered as ME 5325.

ME 5331. ANALYTIC METHODS ENGINEERING. 3 Hours.

Introduction to advanced analytic methods in engineering. Methods include multivariable calculus and field theory, Fourier series, Fourier and Laplace Transforms. Also offered as ME 5331. Prerequisite: Undergraduate degree in engineering, physics, or mathematics.

ME 5332. ENGINEERING ANALYSIS. 3 Hours.

Introduction to partial differential equations and complex variable theory with application to modeling of physical systems. Also offered as AE 5332. Credit will be granted only once.

ME 5335. OPTIMAL CONTROL OF DYNAMIC SYSTEMS. 3 Hours.

Linear and nonlinear optimization methods; optimal control; continuous time Ricatti equation; bang-bang control; singular arcs; differential inclusions; collocation techniques; design of optimal dynamic system trajectories. Also offered as AE 5335. Credit will be granted only once.

ME 5336. OPTIMAL ESTIMATION OF DYNAMIC SYSTEMS. 3 Hours.

Kalman filter design and implementation. Optimal filtering for discrete-time and continuous-time dynamical systems with noise. Wiener filtering. State-space determination. Prerequisite: introductory systems or identification course is desirable. Also offered as AE 5336 and EE 6327. Credit will be granted only once.

ME 5337. INTRODUCTION TO ROBOTICS. 3 Hours.

An overview of industrial robots and applications to traditional and emerging applications. Coordinate systems and homogeneous transformations, kinematics of manipulators; motion characteristics and trajectories; dynamics and control of manipulators; actuation and design issues. Programming of industrial robotic manipulators in the laboratory. Also offered as AE 5337. Credit will be granted only once.

ME 5338. ANALYTICAL AND COMPUTATIONAL DYNAMICS. 3 Hours.

The course focuses on developing the equations of motion for dynamic systems composed of multiple, connected and unconnected, rigid bodies using Kane's method and the Lagrangian approach. The resulting model is used to simulate and visualize the predicted motion. Topics include: kinematics, Euler parameters, kinematic constraints, virtual work, the calculus of variations, energy, momentum, contact, impact, and checking functions. Also offered as AE 5338. Credit will be granted only once.

ME 5339. STRUCTURAL ASPECTS OF DESIGN. 3 Hours.

Emphasis on determination of stresses and prediction of failure in machine and structural components; stress-strain relations in elastic and plastic regions; static failure and failure criteria; contact stress; notched sensitivity, strain-fatigue life relationship' characteristics of cracks in structural components. Also offered as AE 5339. Credit will be granted only once.

ME 5340. AUTOMOTIVE ENGINEERING. 3 Hours.

Introduction to automotive engine types and performance, drive train modeling and vehicle loading characteristics, fueling requirements, fuel injection systems, tire characteristics and modeling, suspension characteristics and handling, braking systems and requirements. Course taught through lecture, student presentations and student design projects.

ME 5341. CONTROL SYSTEM COMPONENTS. 3 Hours.

The components and hardware used in electronic, hydraulic, and pneumatic control systems; techniques of amplification, computation, compensation, actuation, and sensing; modeling of multiport systems as well as servo systems analysis. Pulse modulated systems. Prerequisite: Undergraduate introductory control course in Mechanical Engineering or equivalent or ME 5303 or equivalent. Also offered as AE 5341. Credit will be granted only once.

ME 5342. GAS DYNAMICS. 3 Hours.

Review of fundamental compressible flow theory, method of characteristics for perfect gases, the Rankine-Hugoniot conditions, linearized flow theory. Also offered as ME 5342.

ME 5343. TWO-PHASE FLOW AND BOILING HEAT TRANSFER. 3 Hours.

This is to introduce significant progress in phase change heat transfer and two-phase flow. Boiling heat transfer will be followed by the study of pressure drop and heat transfer in the pipes of two-phase flow. Boiling heat transfer includes pool boiling, forced convection boiling, and critical heat flux. Also selected topics by the instructor (heat pipe, condensation, Helmholtz wave instability, etc.) Also offered as AE 5343. Credit will be granted only once.

ME 5344. VISCOUS FLOWS. 3 Hours.

Navier-Stokes equations and Prandtl's boundary layer approximations; laminar and turbulent boundary layers including internal and external flows. Also offered as AE 5344. Credit will be granted only once.

ME 5345. NUMERICAL HEAT TRANSFER. 3 Hours.

Discussion of numerical methods for conduction and convection heat transfer problems including introduction to various computational techniques suitable for digital computers. Finite difference method is emphasized. Also offered as AE 5345. Credit will be granted only once.

ME 5346. COOLING OF ELECTRONIC PACKAGES. 3 Hours.

This course deals with the development and application of analytical models of thermal phenomena occurring in electronic equipment. The calculation of heat loads and temperature fields using different cooling techniques. Includes parameter evaluation and design studies.

ME 5347. HEAT EXCHANGER DESIGN. 3 Hours.

Design procedures, system evaluations and design parameters in heat exchangers. Heat exchanger configurations; student design projects.

ME 5348. INTRODUCTION TO ALTERNATIVE ENERGY SYSTEMS. 3 Hours.

The course introduces: Principles and thermodynamics applied to fuel cell-based power generation systems; materials and manufacturing methods of two common fuel cells and their stacks; modeling, analysis, and design of fuel cells and various reformers; and design issue of balance of plants such as steam management systems.

ME 5349. ADVANCED COMPOSITES. 3 Hours.

Review of current state-of-the-art applications of composites; structural properties; structure analysis; damage characterization and failure mechanism; notched sensitivity; delamination; fatigue characteristics; composite material testing; characteristics of composite joints. Also offered as MSE 5349 and AE 5325. Prerequisite: ME 5348, MSE 5348, or AE 5315, or consent of instructor.

ME 5351. PRINCIPLES OF SOUND AND VIBRATION CONTROL. 3 Hours.

Fundamental principles of sound and vibration control will be developed. The coupling of mechanical vibrations to unwanted acoustic radiation will be examined using time domain analysis, frequency domain (spectral) analysis and correlation techniques. Standard control methods, including active vibration suppression, will be covered.

ME 5352. FUNDAMENTALS IN ELECTRONIC PACKAGING. 3 Hours.

An introductory treatment of electronic packaging, from single chip to multichip, including materials, electrical design, thermal design, mechanical design, package modeling and simulation, processing considerations, reliability, and testing.

ME 5353. APPLICATION OF COMPUTATIONAL TECHNIQUES TO ELECTRONIC PACKAGING. 3 Hours.

This course will develop the student's capability to characterize the heat performance of electronic cooling devices by using "Commercial Computational Heat Transfer Codes (IDEAS ESC, Icepack, Flotherm, CFDAce, ...)." In addition, the use of MacroFlow, a network based model, for system-level thermal design for electronics cooling will be presented. A number of industry-related problems ranging from first-level packages through system-level packages would be analyzed. At the end of the class, a student is expected to formulate and model complex industry-based problems using the commercial CFD codes. There will be frequent industry speakers on specific projects being studied in the class.

ME 5354. FAILURES AND THEIR PREVENTION IN ELECTRONIC PACKAGES. 3 Hours.

A comprehensive overview of the fundamental causes for failures in electronic assemblies which include the printed wiring board, package, and second-level assemblies. Failure detection techniques and methodologies, key failure analysis techniques used will be discussed.

ME 5355. MECHANICAL FAILURE OF ELECTRONIC PACKAGES. 3 Hours.

Failure analysis, fatigue of electronic packages, fracture and creep behavior of solders. Mechanical properties of substrate materials. Electromigration and failure mechanisms.

ME 5356. CHIPSCALE PACKAGING. 3 Hours.

Overview of area array packaging with special emphasis on the maturing chipscale packaging technology. Topics covered will include the design concepts of this technology, the materials related aspects, the manufacturing processes, and their reliability in a variety of applications.

ME 5358. Racecar Engineering. 3 Hours.

This course intended for Formula SAE team members and other interested students to develop new systems or analyze concepts for the Formula SAE or Formula Electric racecar and related equipment. The students will form teams and perform research and development on projects related to automotive or racecar engineering.

ME 5359. Applied Automotive Engineering. 3 Hours.

The purpose of this course is to gain practical experience in the design and fabrication of parts or systems for automotive applications. The student must write a proposal, give a public oral presentation, and prepare a formal final report. The student must have attained full team member status in a student design competition team. Prerequisites: permission of Director of the Arnold E. Petsche Center for Automotive Engineering.

ME 5360. MULTIDISCIPLINARY INVERSE DESIGN AND OPTIMIZATION. 3 Hours.

For a new design of any realistic device to be competitive, it must satisfy a number of often conflicting requirements, objectives, and constraints. This course offers a variety of basic concepts and methodologies for inverse design and optimization with practical applications in fluid mechanics, heat transfer, elasticity, and electromagnetism. Also offered as ME 5360.

ME 5363. INTRODUCTION TO ROTORCRAFT ANALYSIS. 3 Hours.

History of rotorcraft. Behavior of the rotor blade in hover and forward flight. Rotor configurations, dynamic coupling with the fuselage, elastic and aeroelastic effects. Also offered as ME 5363.

ME 5364. INTRODUCTION TO AERODYNAMICS OF ROTORCRAFT. 3 Hours.

Practical aerodynamics of rotors and other components of rotorcraft. Introduction to performance, handling qualities, and general flight mechanics related to rotorcraft design, test, and certification requirements. Emphasis is on rotorcraft mission capabilities as defined by the customer. Also offered as AE 5364. Credit will be granted only once.

ME 5365. INTRODUCTION TO HELICOPTER AND TILTROTOR SIMULATION. 3 Hours.

Dynamic and aerodynamic modeling of rotorcraft elements using vector mechanics, linear algebra, calculus and numerical methods. Special emphasis on rotors, aerodynamic interference, proper axis system representation, model assembly methods and trimming. Also offered as ME 5365.

ME 5366. FUEL CELLS AND APPLICATIONS. 3 Hours.

The course introduces: Principles and thermodynamics applied to fuel cell-based power generation systems; materials and manufacturing methods of two common fuel cells and their stacks; modeling, analysis, and design of fuel cells and various reformers; and design issue of balance of plants such as steam management systems.

ME 5374. NONLINEAR SYSTEMS ANALYSIS AND CONTROLS. 3 Hours.

Nonlinear systems; phase plane analysis; Poincare-Bendixon theorems; nonlinear system stability; limit cycles and oscillations; center manifold theorem, Lyapunov methods in control; variable structure control; feedback linearization; backstepping techniques. Also offered as AE 5374. Credit will be granted only once.

ME 5378. INTRODUCTION TO UNMANNED VEHICLE SYSTEMS. 3 Hours.

Introduction to UVS (Unmanned Vehicle Systems) such as UAS (Unmanned Aircraft Systems), UGS (Unmanned Ground System) and UMS (Unmanned Maritime System), their history, missions, capabilities, types, configurations, subsystems, and the disciplines needed for UVS development and operation. UVS missions could include student competitions sponsored by various technical organizations. This course is team-taught by engineering faculty. Also offered as MAE 4378 and ME 5378.

ME 5379. UNMANNED VEHICLE SYSTEM DEVELOPMENT. 3 Hours.

Introduction to the technologies needed to create an UVS (Unmanned Vehicle System). Integration of these technologies (embodied as a set of sensors, actuators, computing and mobility platform sub-systems) into a functioning UVS through team work. UVS could be designed to compete in a student competition sponsored by various technical organizations or to support a specific mission or function defined by the instructors. This course is team-taught by engineering faculty. Also offered as MAE 4379 and ME 5379. Prerequisite: B or better in MAE 4378 or AE 5378 or ME 5378 and admission to the UVS certificate program.

ME 5380. DESIGN OF DIGITAL CONTROL SYSTEMS. 3 Hours.

Difference equations, z- and w- transforms, discrete TF (Transfer Function). Discrete equivalence (DE) to continuous TF. Aliasing & Nyquist sampling theorem. Design by DE, root locus in z- plane & Youla parameterization. Discrete state- space model, minimality after sampling, pole placement, Moore-Kimura method, linear quadratic regulator, asymptotic observer. Computer simulation and/or laboratory implementation Prerequisite: undergraduate level controls course or equivalent. Also offered as AE 5380, EE 5324. Credit will be granted only once.

ME 5381. BOUNDARY LAYERS. 3 Hours.

An introductory course on boundary layers. The coverage emphasizes the physical understanding and the mathematical foundations of boundary layers, including applications. Topics covered include laminar and turbulent incompressible and compressible boundary layers, and an introduction to boundary layer transition. Also offered as AE 5381. Credit will be granted only once.

ME 5390. SPECIAL TOPICS IN MECHANICAL ENGINEERING. 3 Hours.

To provide formal instruction in special topics pertinent to Mechanical Engineering from semester to semester depending on the availability of faculty. May be repeated provided topics differ.

ME 5391. ADVANCED STUDIES IN MECHANICAL ENGINEERING. 3 Hours.

May be repeated for credit as topics change. Project work performed under a non-thesis degree will normally be accomplished under this course number, with prior approval of the Committee on Graduate Studies.

ME 5398. THESIS. 3 Hours.

Thesis.

ME 5698. THESIS. 6 Hours.

Thesis Prerequisite: GRAD ME thesis major.

ME 5998. THESIS. 9 Hours.

Thesis Prerequisite: GRAD ME thesis major.

ME 6196. MECHANICAL ENGINEERING INTERNSHIP. 1 Hour.

For students participating in internship programs. May be repeated for credit. Requires prior approval of ME Graduate Advisor.

ME 6197. RESEARCH IN MECHANICAL ENGINEERING. 1 Hour.

May be repeated for credit.

ME 6297. RESEARCH IN MECHANICAL ENGINEERING. 2 Hours.

May be repeated for credit.

ME 6299. DISSERTATION. 2 Hours.

Prerequisite: Admission to candidacy for the Doctoral of Philosophy degree.

ME 6310. ADVANCED FINITE ELEMENT METHODS. 3 Hours.

Modeling of large systems, composite and incompressible materials, substructuring, mesh generation, solids applications, nonlinear problems. Also offered as ME 6310.

ME 6311. ADVANCED STRUCTURAL DYNAMICS. 3 Hours.

Normal mode method for undamped and proportionally damped systems,component mode synthesis, generally damped systems, complex modes, effect of design modification on system response. Also offered as ME 6311. Prerequisite: ME 5311, AE 5311 or equivalent.

ME 6315. ADVANCED COMPOSITES. 3 Hours.

Review of current state-of-the-art applications of composites: composite structural analysis; structural properties, damage characterization and failure mechanism; stiffness loss due to damage, notched sensitivity; delamination;impact; fatigue characteristics; composite material testing; material allowables; characteristics of composite joints. Also offered as ME 6315 and MSE 5349. Prerequisite: ME 5315, AE 5315 or MSE 5348 or equivalent.

ME 6316. ADVANCED ROBOTICS. 3 Hours.

Advanced design concepts such as application of optimization technique and analytical approaches such as 3-D homogeneous matrix method will be introduced. Structural dynamics and control strategy for both rigid and flexible manipulators will be studied.

ME 6337. COMPUTER AIDED DESIGN. 3 Hours.

Role of graphics; image representation, batch and interactive computing, methods of automated mathematical model generation, mainframe and microcomputing in engineering design. Application in mechanical, structural, thermal, controls areas of mechanical engineering.

ME 6344. HEAT TRANSFER IN TURBULENT FLOW. 3 Hours.

Introduction to heat transfer in turbulent boundary layers including internal and external flows, turbulence structure, the Reynolds analogy, van Driest hypothesis, high and low Prandlt number two equation model, effects of surface roughness on heat transfer. Also offered as AE 6344. Credit will be granted only once.

ME 6345. TURBULENCE. 3 Hours.

Physical,numerical and theoretical aspects of turbulence. Review of the conservation equations for incompressible flow. Statistical descriptions pertaining to fluid mechanics. Classical description of turbulence via Reynolds averaging is developed with emphasis on homogeneous, isotropic turbulence. Application to free and wall-bounded flows. Modeling and simulation, including direct numerical simulation, classical turbulence modeling, PDF methods and large eddy simulation. Familiarity with vector or tensor notation is expected. Prerequisite: An advanced course in fluid mechanics (AE 5313/ME 5313) or continuum mechanics (AE 5312/ME 5312).

ME 6397. RESEARCH IN MECHANICAL ENGINEERING. 3 Hours.

May be repeated for credit.

ME 6399. DISSERTATION. 3 Hours.

May be repeated for credit.

ME 6697. RESEARCH IN MECHANICAL ENGINEERING. 6 Hours.

May be repeated for credit.

ME 6699. DISSERTATION. 6 Hours.

Prerequisite: Admission to candidacy for the Doctor of Philosophy degree.

ME 6997. RESEARCH IN MECHANICAL ENGINEERING. 9 Hours.

May be repeated for credit.

ME 6999. DISSERTATION. 9 Hours.

Admission to candidacy for the Doctor of Philosophy degree.

ME 7399. DOCTORAL DEGREE COMPLETION. 3 Hours.

This course may be taken during the semester in which a student expects to complete all requirements for the doctoral degree and graduate. Enrolling in this course meets minimum enrollment requirements for graduation, for holding fellowships awarded by The Office of Graduate Studies and for full-time GTA or GRA positions. Students should verify that enrollment in this course meets other applicable enrollment requirements. To remain eligible in their final semester of study for grants, loans or other forms of financial aid administered by the Financial Aid Office must enroll in a minimum of 5 hours as required by the Office of Financial Aid. Other funding sources may also require more than 3-hours of enrollment. Additional hours may also be required to meet to requirements set by immigration law or by the policies of the student's degree program. Students should contact the Financial Aid Office, other sources of funding, Office of International Education and/or their graduate advisor to verify enrollment requirements before registering for this course. This course may only be taken once and may not be repeated. Students who do not complete all graduation requirements while enrolled in this course must enroll in a minimum of 6 dissertation hours (6699 or 6999) in their graduation term. Graded P/F/R.